EUTECH INSTRUMENTS ALPHA PH1000 PHORP CONTROLLERTRANSMITTER Manuale delle Istruzioni Pagina 21
- Pagina / 40
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Instruction Manual alpha-pH 1000
21
1) Follow directions in 7.3.1 to enter Control Relay mode.
2) Press the ENTER key. Scroll with the ▲ or ▼ key until the upper
display shows the hysteresis (dead band) value and the lower display
shows “HYS”.
3) Press the ▲ or ▼ keys to enter your hysteresis value for Set point 1
(Set point 2). Your controller will activate at the value you select.
4) Press the ENTER key to confirm your selection.
5) Proceed to 7.3.5 step 3, or return to Measurement mode by pressing the ▲ and ▼ keys simultaneously
(escape).
NOTE: Please refer to Appendix 3 for a graphical representation of the Hysteresis.
7.3.5 Setting an on-delay time lag
You can set as time delay for each relay, which stops the relay from switching on the moment the set point is
exceeded. This controller lets you set a 0 to 2000 second time delay before the relay activates.
1) Follow directions in 7.3.1 to enter Control Relay mode.
2) Press the ENTER key. Scroll with the ▲ or ▼ key until the upper
display shows “on delay” time and the lower display shows “On.d”.
3) Press the ▲ or ▼ key to enter on-delay time for Set point 1 (Set point
2). The controller will delay activation for the number of seconds (0 to
2000) you select.
4) Press the ENTER key to confirm your selection.
5) Proceed to 7.3.6 step 3, or return to Measurement mode by pressing the ▲ and ▼ keys simultaneously
(escape).
7.3.6 Setting an off-delay time lag
You can set as time delay for each relay, which stops the relay from switching off the moment the value
reached the set point and hysteresis. This controller lets you set a 0 to 2000 second time delay before your
relay deactivates.
1) Follow directions in 7.3.1 to enter Control Relay mode.
2) Press the ENTER key. Scroll with the ▲ or ▼ key until the upper
display shows “off delay” time and the lower display shows “OF.d”.
3) Press the ▲ or ▼ key to enter on-delay time for Set point 1 (Set point
2). Your controller will delay activation for the number of seconds (0 to
2000) you select.
4) Press the ENTER key to confirm your selection.
5) Continue with Advanced Set-up mode procedures, or return to Measurement mode by pressing the ▲
and ▼ keys simultaneously (escape).
0.50
pH
HYS
SETUP
HOLD
0
On.d
SETUP
HOLD
0
OF.d
SETUP
HOLD
- Instruction Manual 1
- Preface 2
- TABLE OF CONTENTS 4
- 1 INTRODUCTION 5
- 2 ASSEMBLY AND INSTALLATION 6
- 3 ELECTRICAL CONNECTION 7
- Symmetrical high-impedance 8
- Asymmetrical connections 8
- 3.2 Back Panel 9
- 25.0 10
- Function Groups 11
- 4.3 Control Concept 12
- 5 MEASUREMENT 13
- 59.0 mV 15
- Atc 18
- 0 21
- PrP 23
- t.PL 23
- out 24
- 8 AUTO/MANUAL MODE 29
- 9 TECHNICAL SPECIFICATIONS 30
- 10 ACCESSORIES 32
- 11 GENERAL INFORMATION 33
- 12 APPENDICES 34
- 12.2 Appendix 2 35
- 4.0 4.5 9.5 10.0 36
- 12.4 Appendix 4 37
- Time [s] 38
- Manufactured by: 40
- Distributed by: 40
Prodotti e manuali riguardandi Misurazione, test & controllo EUTECH INSTRUMENTS ALPHA PH1000 PHORP CONTROLLERTRANSMITTER
(4 pagine)
Misurazione, test & controllo EUTECH INSTRUMENTS ALPHA COND 560 Manuale delle Istruzioni
(52 pagine)
(52 pagine)
Misurazione, test & controllo EUTECH INSTRUMENTS ALPHA PH1000 PHORP CONTROLLERTRANSMITTER Manuale Utente
(20 pagine)
(20 pagine)
Misurazione, test & controllo EUTECH INSTRUMENTS ECOSCAN TEMP JKT PORTABLE METER Manuale delle Istruzioni
(20 pagine)
(20 pagine)
Misurazione, test & controllo EUTECH INSTRUMENTS ECOSCAN TEMP 456 TEMPERATURE METER Manuale delle Istruzioni
(24 pagine)
(24 pagine)
Samson 3760 Электропневматический позиционер manuals
Owner’s manuals and user’s guides for Equipment Samson 3760 Электропневматический позиционер.
We providing 1 pdf manuals Samson 3760 Электропневматический позиционер for download free by document types: User Manual
Commenti su questo manuale