EUTECH INSTRUMENTS ECOSCAN TEMP 456 TEMPERATURE METER Manuale delle Istruzioni Scaricare il pdf (Pagina 16)

5. DISABLE AUTO POWER-OFF FEATURE

By default this meter will auto power-off 17 minutes after last key operation.

This is to conserve battery power. The auto power-off feature can be disabled in

situation where longer periods of monitoring are desired.

NOTE: The meter switches back to auto power-off mode as soon as it is turned

off.

Procedure:

1. With meter off, press down

ON/OFF and MIN/▼ keys

together.

2. Release ON/OFF key first

and wait for 2 seconds

before releasing MIN/▼

key.

3. The meter goes through

the power-up sequence

before coming to

measurement mode.

4. The “LO” indicator will blink

for every 2 seconds,

indicating that the auto power-off feature is disabled.

NOTE: When battery is low, the “LO” indicator will blink faster at every 1

second.

5. Once the meter is switched off and subsequently switched on again,

the auto power-off feature will be enabled.

NOTE: Under default operation (when auto power-off feature is enabled), the

appearance of “LO” indicator permanently on the display means the battery

power is low. Once a new battery is installed, the “LO” indicator will disappear.

The "LO" indicator will blink, indicating that the auto

power-off feature is disabled

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Nessun commento

EUTECH INSTRUMENTS ECOSCAN TEMP 456 TEMPERATURE METER Manuale delle Istruzioni Pagina 16